![]() ![]() high-speed discs, which work with a rotational speed of up to 16,000 rpm, ensure an even grinding pattern. ![]() With the new finish system from MONTANA, the side edges receive the perfect racing finish. It enables a particularly material-friendly preparation from the ski tip to ski tail, which is especially important for carving skis.ĭue to the pressure curve, exceptional grinding with minimal grooving is possible with simultaneous consideration of the ski geometry. The pressure curve is also important inside edge preparation. The special pressure curve ensures a precise edge angle over the entire ski or board length. The ceramic gliding plate follows the ergonomics of the ski and adapts exactly to every radius. Side edge preparation is carried out with high-tech ceramic belts for even removal of material and an extremely fine finish. ![]() The skier/boarder can interrupt a started curve at high speed without the worry of falling. Through Radial Tuning, the skis and snowboards are noticeably easier to turn and the edge grip under the bindings is improved considerably. In this way, the edge angle varies over the entire length of the ski, but is optimally aligned with the width of the ski. In the bindings area, the edges are ground to be less hanging. at the tips and tails, so that the edges hang more noticeably. With this special process, the skis are more strongly tuned in the wider areas, i.e. in the bindings area) has proved to be worthwhile. The contact pressure can be varied in 10 segments to allow particularly even tuning. The specially developed tuning stones are set at a precisely defined angle with the dressing tool. With the unique MONTANA High-Tech Tuning (HTT) system, the steel edges on the base side are tuned in a lightly hanging form at an angle of approx. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |